Provide
floor plans, elevations, roof plan and site
plan providing North point and site plan with
locations and size of permanent shading eg,
banks, hedges, fences, trees
Provide sufficient details
of building components that impact on thermal
gain or loss eg wall details, insulation,
joinery colour, glazing type
Send (two copies - one
for stamping and returning and the other for
our files which are audited by ABSA ) or email
(preferably as A2 .pdf files ) to Incodo Limited
As the orientation of
the building in relation to the path of the
sun impacts significantly on thermal loads
assessments cannot be done without a specific
North point. This means assessments cannot
be done for a range of or book of standard
plans
The following details
are needed.
Checklist of details needed on plans IMPORTANT
.
Leave a space, 120mm wide by 150mm deep, on
one sheet of the plans for the Thermal Specification
to be placed.
For a dual occupancy leave two spaces
Site plan, floor plans, elevations and sections
scaled(1:100) and dimensioned.
Plan sheets numbered.
True North or magnetic North shown on plan
Roof materials ( eg tiles) Colour of roof
materials (Light, medium or dark) Ceiling
material ( eg plasterboard)
External wall materials ( eg brick veneer)
Colour of external wall materials (Light,
medium or dark)
Internal wall materials
Window type ( eg timber), size and position.
(Essential to show sizes of windows or glazed
doors that do not appear on an elevation)
Shading devices if any, size and position
Type of first floor construction
Type of floor coverings on first floor eg
carpet
Type of ground floor construction
Type of floor coverings on ground floor eg
ceramic floor tiles
